VVDI2 Program Skoda Octavia Simos7.1 ECU& 09G TCU OK

VVDI2 Full Version supports ECU flashing after module replacement.

Here we are going to show you how to program ECU and TCU from Skoda Octavia using VVDI2.

Modules:

ECU Simos7.1

TCU 09G

Steps:

1.ECU/ Engine:

Run VVDI2 software and go to Skoda menu.

Go to “01 Engine”.

vvdi2-program-skoda-octavia-simos7.1-ecu-09g-tcu-ok-1

Read DTC.

vvdi2-program-skoda-octavia-simos7.1-ecu-09g-tcu-ok-2

Select “ECU Flasher”.

Load file to flash ECU.

Switch ignition OFF then ON as required.

ECU flash done.

vvdi2-program-skoda-octavia-simos7.1-ecu-09g-tcu-ok-3

Switch ignition OFF then ON as required.

Select “Coding”.

Set new coding from “5” to “75”.

vvdi2-program-skoda-octavia-simos7.1-ecu-09g-tcu-ok-4

2.TCU/ Gearbox:

Go to “02 Gearbox”.

Select “ECU Flasher”

Load file to flash TCU.

TCU flash done.

vvdi2-program-skoda-octavia-simos7.1-ecu-09g-tcu-ok-5

Read and clear DTCs.

vvdi2-program-skoda-octavia-simos7.1-ecu-09g-tcu-ok-6

Credit to hesham essam

Skype: xhorsevvdi.com