VVDI2 Works on Skoda Octavia 2015 MQB Mileage and Key

VVDI2 can support MQB KM function free,and later time MQB Key Learn function will be added free in item NO.HKSV86 VVDI2 full version,no need to add ID48 96bit function to get MQB Key Learn.But ID48 two authorization still needs to buy separately.And here we will display VVDI2 works on MQB both KM and key function.

1.How to use VVDI2 do Skoda Octavia 2015 MQB Mileage

Start VVDI2 VAG software,Select Key Learn->MQB platform instrument immobilizer->Instrument with NEC35xx (Continental/VDO)

Click on Diag to load vehicle information.Instrument type: MQB NEC35xx Continental VDO.

Click on read KM

Input the km you want to change,then click write.

Click to continue.

You can save it first.

Switch ignition on with working key before press OK. If car has Keyless Go, put the working key nearly car coil and switch on.

Choose security login: Login Method 2 (because software version of the dashboard belong to 2210)

Write successfully.

Use Reset instrument to active instrument after all the operation is finished.

Reset success.End.

2.How to use VVDI2 Program Skoda Octavia 2015 MQB Key

VVDI2 VAG software,then Key Learn->MQB platform instrument immobilizer->Instrument with NEC35xx (Continental/VDO)

Diag to get car info.

Click “Read EEPROM/Flash” and save data.

Switch on with working key before press ok.If car has keylessgo,put the working key nearby car coil and switch on.

Choose Login Method 2, dashboard 2210.

1. The dashboard is dark when you see this tips. You need finish all operation before reset instrument.
2.Read EEPROM and save it.
3.Read IMMO data and save it.
4. Prepare a dealer key (You can go to step 7 if have working key aslo
don’t want to add key)
5. Reset instrument
6. Add key use immo data to learn the new dealer key to car
7. Finish other customer requests.

Click OK to continue.

Click on Read Immo data and then save it

Select Maker Dealer Key->Skoda

Prepare OEM key:need special key or OEM key,you must provide an original key ID to prepare OEM key,the OEM key can do online operation,OEM key can start engine directly for 4th immo system.For 5th immo ssytem need learn again.

Click “Check working key position”

Input exist working key to programmer.The key position will gray once detect success.

Click Yes to continue.

Input original working key to VVDI2 and press OK.

Input OEM key to programmer and continue.

Use Reset Instrument to activate instrument after all the operation is finished.

Click Reset Instrument ,then add key.

Select Learn key,login with security code from IMMO data.Then press “Load IMMO Data”,load the data you save before.

Choose yes,car has keyless.

Click yes.

Put the dealer key nearby car ignition switch and switch ON dashboard before continue.

Test the remote control and start car.

Sales xhorsevvdi.com