One customer gave feedback that his Dolphin XP007 couldn’t move back and forth and it could only rotate. Here Xhorsevvdi tech shows How to Solve: 1.Turn XP007 around, and check if something is stuck at the bottom and remove it.… Continue Reading
Here is a review of two Xhorse Key Cutting Machine – Dolphin XP005 and Dolphin XP007. 1.XP007 Bought it because it has such a clamp, which is one of the most versatile. This also comes with a battery… Continue Reading
Question: The cutter/ probe gets stuck in the holder of Dolphin XP005/ XP005L/ XP007 because 1)Clean cutter but dry tissue left inside 2)Probe gets broken … First, the only way to remove stuck parts is pulling them out, or replace… Continue Reading
Question: Any recommendation to get some of this belts? Dolphin XP007. Mine get broken. Where to Get a new belt to replace? 1)Check the original package, there is a spare belt 2)Use a belt with the same size, it’s… Continue Reading
Question: Dolphin XP007, why on the left of the key are both lights green and on the left it touching one key? Here Xhorsevvdi technician Answer: During Calibration, Only Left light on, Probe higher than Cutter; Move the micro-adjuster knob to… Continue Reading
In this article, we’ll share a few tips about the selection and use of Xhorse Key Cutting Machine cutter & probe. Probe Self-calibrated machines (Dolphin XP005L…) are equipped with only one 1.0mm probe, so just use this probe whatever cutters… Continue Reading
Q: Dolphin XP007 didn’t work when the battery was coming out of charge. I plug it in, and it lights on but seems its motor still didn’t move. Is it a battery issue? Xhorsevvdi enigneer answers: From pictures and videos, the… Continue Reading
Xhorse Dolphin XP007 is Manually Key Cutting Machine, and can do multi-brands keys, here is the blog about Dolphin xp007 cut VW HU66 key. Please note that manually key cutting machine needs you have the original key. Loosen the clamp,… Continue Reading
Xhorse Dolphin XP007 Manually Key Cutting Machine is in stock in EU/UK warehouse, and here we will share one feedback about dolphin xp007 cut toyota key. Xhorse Manually key cutting machines need you have original key. 1.Put original key on… Continue Reading
Watch the following images showing Xhorse Dolphin XP007 Needle Leveling not light up. Xhorse chief engineer replied: If Dolphin XP007 is within the warranty period, please contact me to confirm whether it is the problem of the screen, the continuity… Continue Reading
Xhorse Dolphin XP007 support EU/UK/US ship, NO Tax, it can support cut laser, dimple & flat keys. And we share on review from Jonas Spalthoff. Can someone tell me how I can properly clamp a bmw key hu58 with the Dolphin xp007?… Continue Reading
E-mail:sales@xhorsevvdi.com
Whatsapp: +86-13983756354
Live Chat: Online Service
Skype: xhorsevvdi.com
