Xhorse Dolphin XP-007 Main Axis Not Moving Solution

Q: Dolphin XP007 didn’t work when the battery was coming out of charge. I plug it in, and it lights on but seems its motor still didn’t move. Is it a battery issue?

xhorse-dolphin-xp-007-main-axis-not-moving-solution-1 xhorse-dolphin-xp-007-main-axis-not-moving-solution-2

 

Xhorsevvdi enigneer answers:

From pictures and videos, the battery is good but main axis’ motor didn’t work. The possible reason is broken belt.

 

Solution:

Replace its belt. (Spare belts are included in package)

 

Detailed procedure:

1)Remove micro-adjuster knob and pre-positioning knob

xhorse-dolphin-xp-007-main-axis-not-moving-solution-3

2)Unscrew 4 screws in the protection cover and remove it.

xhorse-dolphin-xp-007-main-axis-not-moving-solution-4

Remove 4 screws in the motor cover and 4 screws in the side cover.

xhorse-dolphin-xp-007-main-axis-not-moving-solution-5

Lower main handle and then take out side cover.

xhorse-dolphin-xp-007-main-axis-not-moving-solution-6

Restore main handle and then take out motor cover. (Watch cables connected to motor cover)

xhorse-dolphin-xp-007-main-axis-not-moving-solution-8

xhorse-dolphin-xp-007-main-axis-not-moving-solution-8

Replace the belt and restore XP007 Key Cutting Machine.

xhorse-dolphin-xp-007-main-axis-not-moving-solution-9

 

Video Reference:


Any question, contact us.

https://www.xhorsevvdi.com/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sales xhorsevvdi.com