How to use Condor XC-MINI Cut GM DWO4 B114R Key with M1 Clamp?

Xhorse Condor XC Mini Master can cut key by several different way,and here we will display Cutting by Bitting way with DWO4 key GM B114R detailed instruction.

(Get New  Xhorse Condor XC-Mini Plus Key Cutting Machine)

How to use Condor XC-MINI to cut GM DW04 B114R with M1 Clamp:

1.Start Condor XC-MINI Key Cutting Machine,and click “Cutting by Bitting”on the screen.

mini condor

2.Enter with “DWO4”


3.Then the screen will display which clamp needs to work with.Please use the M1 clamp,put the located block into M1 clamp shoulder groove position.

mini condor

4.Tighten the M1 clamp.

condor mini gm

5.Put the original DWO4 key. Let the aligh on the key shoulder position by using the located block.

xhorse condor xc-mini

6.Tighten the original key,and remove located block.

condor key cutting

7.Click “Key Code”on menu.Then confirm.

mini condor gm b114r

8.Put the located block into M1 clamp shoulder groove position again,then put the DWO4 blank key blade on clamp.

condor xc-mini

9.Click “Correcting & Cut”,then cutting in process.

mini condor