This article is going to show you a new feature of Condor XC-Mini Plus II Machine – Modify key blank to flip key.
The procedure is mainly two steps: Tail Correction and Groove Cutting.
Step 1. Tail Correction
Turn on Condor II Key Cutting Machine, select
Modify key>>Tail correction>>With handle
Switch M5 Clamp to side A, tighen the clamp, and click “Initailize”.
Put key blank on clamp. (make sure cutting part of key blank is conductive, or the probe may get damaged)
Click “Start spindle”, remove tail part by setting X, Y, Z-Axis manually.
Step 2. Groove Cutting
Back to “Tail correction” screen.
Enter “Without handle”, and select default blank shape.
Put key blank in clamp again.
Click “Start cutting”.
Key cutting complete.
Last, assemble the blade and Xhorse Flip Key.
More functions to be explored!