If your Xhorse Condor XC-003 manual key cutting machine starts spinning the motor immediately after power-on and the motor keeps running without stopping, don’t panic. This issue is often related to the internal wiring.
Problem
After turning on the Xhorse Condor XC-003, the motor runs continuously and cannot be stopped using the power switch. The only way to stop it is by unplugging the power supply.
Solution
Open the machine and inspect the wiring sequence of the internal wire harnesses.
Adjust the order of the red and black wires
The correct sequence is as follows:
Tip: Always disconnect the power before opening the device, and double-check all cable connections before reassembling the machine.
Skype: xhorsevvdi.com
Whatsapp: https://wa.me/8613983756354
Whatsapp: 
Skype: