VVDI Prog super programmer can do MCU,ECU,IMMO.etc.Here we will display eeprom&flash one type ATMEL AT24C16.VVDI Prog newest version is V4.5.9 now,if you not use newest version,get newest vvdi programmer software free from us.
1.Run VVDI Prog software and choose detailed type.
2.Read the common EEPROOM, note: please insert the chip by following the below picture.
3.Click “Check blank”
4.Click Open,and open the .bin file.
5.After load file successfully.Then click “Write”.
6.Write successfully,you can check the file.
7.Erase process.Click “Erase” on the menu.Confirm Yes.
8.After erase,please click “check blank” again.