Tips on Making Golf 7 key with Xhorse XEMQB1EN key

One locksmith feedback: tried to add dealer key for Golf 7 with this xhorse proximity key. I generated mqb remote with transponder mqb48 using mini key tool and i used vvdi2 to program the key. It says made dealer key success , but it was impossible to learn key to the car . Every time when it says now learn all new keys it would only recognize original key. I put learn 2 new keys and it would enter key mode 1-2 , but I couldn’t make it 2-2 with the new key….


Image source:


The next advice is from the experienced locksmiths:

The remote you tried is for a proximity system and the vehicle you are trying to code it into is non proximity. Therein lies the problem. The remote you used is suitable for mk7 golf MQB type keyless go. You need XEMQB1EN, this one got integrated transponder (XKMQB1EN won’t work for mqb golf 7).


Image: Xhorse Super remote key XEMQB1EN


Operation guide:

Please try the downgrade version from V2 to v.

Note: Some vehicles has no proximity startup after matching, please use V2 version.
Please use VVDI2 tools to match, and match with the battery, match with the sensing end of the inductor of the remote perpendicular to the sensing area, some cars are weak on sensing, you need to take apart the sensing coil of the car and hold the key to learn.

The note above is direct from XHorse app for mini key tool. Contact support in-app if it can’t help you.



One more time, go for Xhorse Super Remote Key XEMQB1EN here: