One customer gave feedback that his Condor Mini Plus could not detect key and it said “Learn Fail:12 (probe detected)”. Here Xhorsevvdi tech shares Reason: Machine is short-circuited. Solution: Clean LED cover and remove metal filings inside. Hope this… Continue Reading
Question: M5 Clamp won’t work with my Condor XC-Mini. I update it to the latest version, but now I can’t calibrate the machine at all, with M1 M2 M5… it could work with M1 M2 clamp before update. Here is… Continue Reading
Question: It has not been used for several days. and it always stands in one place, I don’t carry it anywhere. If this error needs to clear internal error in xhorse update kit software, and then update firmware. To clear… Continue Reading
One customer asked how his Dolphin XP005 cut HU162T Golf7 key blade. Here we will show you. HU162T 9 Bitting and HU162T 10 Bitting: How to Cut VAG HU162T Blade? Tools Condor XC-Mini Plus Step 1… Continue Reading
One customer gave the feedback that the cutter of his Xhorse Condor Mini Plus stopped moving before cutting a HU66 blade. Here is how Xhorsevvdi technician troubleshoots, 1.Do Main motor test (Path: Device Information>>Motor Measurement>>Main motor test) Notes: 1)See if… Continue Reading
Condor XC-Mini Plus V3.6.0 firmware is released! V3.6.0 Condor XC-Mini Plus Update Info (2022-09-09): + Add Citroen C-Quatre key data + Add Honda Legend key data + Fix Buick HU100 key data issue + Fix Smart For Tow key… Continue Reading
One customer gave feedback that he cut VVDI MB Key via HU64 option using Xhorse Key Cutting Machine but key didn’t work. So, how to cut Benz HU64 key? Here we have collected several tips on it. There are… Continue Reading
Question: If a cutter breaks on Dolphin XP005 during cutting, or it runs out of battery in the middle of a cut, Machine seems to give errors when the probe doesn’t see an uncut key. Is there any way to continue… Continue Reading
One customer gave feedback that his Condor XC-Mini Plus prompts “internal error 1(-3)”. Here Xhorsevvdi shows the Solution: Repair firmware by Xhorse Upgrade Kit. (Notice: if you need to save history, please Read history and backup) Step 1. Go to… Continue Reading
Question: To duplicate the blade on a Renault Megane 2 using Condor XC-Mini Plus, it says “Learn Fail, 25 (Put Key)”. Reason: The thin blade of Megane 2 only has one side to cut, and is so low on the clamp… Continue Reading
Issue: Condor XC-MINI Plus, the time on the screen was set correctly before, but every time I turn it on, it became wrong again. Xhorsevvdi technician gives the Solution: Replace the button battery (CR1220) on the motherboard. Detailed Procedure:… Continue Reading
Xhorse customers watch here! Xhorsevvdi.com “11.11” sale has already kicked off. Hurry up! lower price up to 20% OFF for 9 days: 9th- 18th,2021 Key Cutting Machine up to $146 off VVDI2 /VVDI MB Key Program up to $90 off Value Bundle… Continue Reading
E-mail:sales@xhorsevvdi.com
Whatsapp: +86-13983756354
Live Chat: Online Service
Skype: xhorsevvdi.com
