How to use VVDI2 Key Programmer Program Audi Q7 2007 key?

VVDI2 Vag support change KM,EEPROM Dump Tool,Engine control Unit,K-Line Instrument/Immobox,adapt Unit,Component Protection.We will show steps about VVDI2 Program Audi Q7 2007 key.

1.Audi Q7 2007 key OBD Port,and key.

2.Start VVDI2 VW software,choose “key learn>>4th immobilizer system-Audi>>A6L/Q7/Allroad”.

3.Inert the key into car,ignition one.Click “Autodetect from engine(ECU).”

4.Reading data successfully.Then it displays pin and mac.

5.Input key numbers to learn,then click “Key Learning”.

6.It will pomp up like the following pic shows.

Inert the dealer key into car and switch on for at lease 2 seconds.The time for changed key should smaller than 5 seconds.Press OK button after all key is learned.

7.Back to VAG software,click “Key Learn>>Key Learn”

8.Detected vehicle.

9.Click “Autodetect POM/CS”

10.Autodetect completely,it will display the PIN/CS.

11.Input Key count,and click “Learn”

12.Insert every key and switch on.

Adaption finished.