How to use Xhorse VVDI2 add 2007 Saab 9-3 key with VVDI Prog

Look here! Today Xhorsevvdi made a guide of how to make a dealer key for  2007 Saab 9-3 by using Xhorse VVDI2 and vvdi prog key programmer, Some users struggle to obtain the PIN for Saab’s and cannot program via OBD so we show you the method that will overcome this problem.

Tools option:
Xhorse VVDI2
Xhorse VVDI PROG

Value package here:https://www.xhorsevvdi.com/wholesale/xhorse-vvdi2-plus-vvdi-prog.html

Need: Removed the CIM unit from this Saab 9-3
2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-01
To identify the chip that needed reading
2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-02
if we couldn’t see what number chip it was,spaying the chip with some brake cleaner did the trick, and don’t worry, this is safe and won’t cause any damage
once it dried we desoldered the chip and soldered it to the eeprom adaptor included with VVDIProg
2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-03
Connect vvdi2 and VVDI prog (with EEPRO Adaptor mounted) to PC by USB
2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-04
Change type to “1-EEPROM & Flash” >>Change brand “MICROCHIP”>>
Change Chip to 293/lc/AA66A (8PIN)
Then click read 05
2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-05
Once the chip has been read save the state your PC
2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-06
Select vehicle by changing area factory car and type
load the file that you saved Prior to this step
select key destination
2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-07 2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-08

2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-09
Place the new key in VVDI2
2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-10

Make dealer key
2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-11
Pick PCF 7936(PCF 7946) as your transponder type
2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-12

 

when this message appears,click ok
2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-13

Prepare dealer key success, it can start engine after write back new dump file or learn it to car
Add another new key need load the new data file,
Press OK to save the new dunmp file

Save new dump file to PC
2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-14

Open new dump file
2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-15
Write new data to the chip

2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-16
after Operation success, then verify
check success

2007-Saab-9-3-Spare-via-xhorse-vvdi2-vvdi-prog-17
Resolder EEPROM to CIM, reassemble CIM unit and install back into the car, once complete reconnect the battery
Check the spare key, it works
2007-Saab-9-3-Spare-key

Xhorse vvdi2 and VVDI prog program 2007 Saab 9-3 add keys successfully!

https://www.xhorsevvdi.com/

Sales xhorsevvdi.com