V4.5.5 VVDI PROG Programmer is super programmer support read/write/save eeprom data.And VVDI Programmer can get free BMW ISN read function and NEC, MPC, Infineon etc chip,if it support,the ISN will display automatically.
Xhorse VVDI Prog Programmer will be a good tool to work with VVDI MB Tool,VVDI2 Key Programmer.And here is some steps about using VVDI Prog to read Benz EIS W203 1J35D/xJ74Y(MC69HC08AZ60).
1.Start VVDI Prog software,and choose the detailed type.
2.Click Connection Diagram,then it will display the diagram,please soldering like the pic shows:
3.Use the MCU Reflash Cable V2,and do the diagram.Please do not forget the black color connection in the diagram,it is black color,not much obvious.
And in the diagram pic,it shows “Connect these pads”
The connection cable of two points,the cable is 4 times of hair is OK,no need too long too thick,as it does not need too high voltage.
4.After connected well,click read on the software menu,and then save the data you have read.
Whatsapp: 
Skype: