One customer gave feedback that he cannot connect VVDI Key Tool Lite to his phone. And Xhorse app said “Device connect failed” and asks if the phone supports OTG function. Here is the Solution: 1)Check OTG function in phone settings.… Continue Reading
Question: How to Fix the problems that Xhorse Key Tool Max Pro does not copy the new key car file? I used XM38 Smart Key. Here Xhorsevvdi tech shares the Solution: 1)Generate the remote control for 8A-A8 2)Copy (Load) EEPROM… Continue Reading
One Xhorse VVDI2 user gave feedback that he upgraded everything and still get this message. Here is the Solution: Update Software and Firmware to the latest version and try again. Software: Download V7.3.5 VVDI2 Firmware: Update to V7.3.5 by… Continue Reading
M4 Clamp shim could help fix blades on Xhorse Dolphin Machine, but what replacements can we use if we lose it? Here is the Answer: The shim is around 1.12mm thick, use something of the same or close thickness. Battery… Continue Reading
Xhorse V108 IMMO Database adds Fiat smart key and Jeep Renegade MQB48 key! Database Available in: Key Tool Max Pro Key Tool Plus Update Info: 1)Fiat Viaggio, Ottimo 3 Button Smart Key Generate Dealer Key Add Key and All… Continue Reading
New Xhorse XDNPRBGL MQB-RH850/V850 Adapter is released! Here have collected FAQs about the new item. Check them out! FAQs: 1.Only Key Tool Plus? VVDI PROG or Mini Prog? Now RH850 Cable only works with Key Tool Plus. Please wait for… Continue Reading
Question: Xhorse Condor Mini Plus II Machine,No error it’s just make weird noise. The it starts shaking. Only the cutting side. Feel like I have to tie it up from inside. Here Xhorsevvdi tech shares the Solution 1: Tighten screws… Continue Reading
Question: Xhorse Key Tool Max Pro keeps showing “Request failed, try again later” during id48 calculation. Here is the Solution: 1)Test network Switch to X-boy page. Select Support Centre>>Network Detection 2)Try hotspot according to results Hope this could help! https://www.xhorsevvdi.com/… Continue Reading
Question: Bought Xhorse MQB Cluster License. Cluster is 3g0920751a and it matches with the VVDI PROG Programmer instruction for d70f3532-a, I have cut tracks but purple still connected to reference points indicated, FVDD still connected to ref1 and ref2 even… Continue Reading
Question: Condor Mini Plus II, The machine was working fine for a few weeks after placing mother board. It has broken probe and cutter because it brakes when machine doesn’t wanna go up. Maybe Z axis motor idk. Motor Measurement… Continue Reading
One customer gave feedback that he can’t update Xhorse Dolphin XP005 firmware since PC suite won’t identify the machine. And software shows “Select device not found”. Here is the Answer: Install driver and update again (Path: Upgrade kti>>Driver>>2016-02-02driver) Hope this… Continue Reading
One customer gave feedback that his Condor Mini Plus II Machine gave error code 4, 5, 6. He got it down to 0.12 on the z axis but I haven’t got it to zero yet. Here is the Solution: 1.Do… Continue Reading
E-mail:sales@xhorsevvdi.com
Whatsapp: +86-13983756354
Live Chat: Online Service
Skype: xhorsevvdi.com
