This article is about to show you three ways to read BMW EWS3 module by different Xhorse Programmers and adapters.
Here is what Xhorsevvdi brings you:
- 1. Mini Prog
- 2. VVDI Prog+ VVDI PROG EWS3 Adapter
- 3. Mini Prog + XDNP50 EWS3 Adapter(for Mini Prog / VVDI Key Tool Plus)
Method 1.Mini Prog with Key Tool Max
In this way, soldering is required.
And then connect another side to DB15 cable.
Finally connect it to Mini Prog.
Besides, the cable with a soldering side is not included in the package of Mini Prog or Key Tool Max.
Method 2. VVDI Prog Programmer + VVDI PROG BMW EWS3 Adapter with VVDI2
In this way, soldering is required either but becomes easier.
Insert EWS3 adapter into EWS3 module.
On the back, solder EWS3 adapter’s cable to the point shown in diagrams.
Finally insert EWS3 adapter into VVDI Prog, and supply 12V power to it.
VVDI Prog options:
Type – 4-IMMOBILIZER
Brand – BMW
Chip – EWS3-KLINE(0D46J)_READ.
Read EWS3 successfully.
Then we can load the file to VVDI2 for key adding.
Method 3. 1. MINI PROG + XDNP50 BMW EWS3 Adapter with Key Tool Plus
In this way, soldering is not required.
Clip PIN1 by the EEPROM clip
Use the convertor to connect EWS3 module to XDNP50 EWS3 Adapter
Combine EWS3 module, EWS3 adapter and Key Tool Plus.
3. 2. MINI Prog and key tool max read BMW EWS with XDNP50 EWS3 Adapter
More detailed operation:
http://blog.xhorsevvdi.com/xhorse-xdnp50-ews3-adapter-tutorial/
Alright, Xhorse XDNP50 EWS3 Adapter is the easiest way to read BMW EWS3.
More things making your job easier