How to Read BMW EWS2/EWS3/EWS4 in A Solder-free Way?
This article is about to bring you a method to read 2nd/3rd/4th BMW EWS module respectively. All No soldering cables or removing MCU.
Contact us to check if your EWS is supported!
Part 1. EWS2
Tools: Ak90+ Key Programmer (Read 1D47J, 2D47J, 0D46J, 2L86D without removing MCU)
Model: BMW 3er E36 1996
MCU: 2D47J
Procedure:
Connect MCU to AK90 unit by 10-pin cable.
Connect AK90 unit to PC by USB cable.
On AK90 app,
Press “Connect” and select chip type.
Watch the prompt and click on “Read EWS”.
Part 2. EWS3
Tools: Xhorse XDNP50 EWS3 Adapter
Procedure:
Use EEPROM clip to clip PIN1.
Connect EWS3 module to XDNP50 EWS3 Adapter.
Combine EWS3 module and EWS3 adapter.
Device path:
- Programmer>>IMMO>>BMW>>BMW>>EWS3(Adapter)>>Read>>EEPROM
Part 3. EWS4
Tools: EWS4 Adapter
Model: BMW X3 2007
MCU: 2L86D
Procedure:
Put EWS4 module in the adapter and lock it.
Select “4-IMMOBILIZER” “BMW” “EWS4 X(ADAPTER)”.
Press “Read” and “Save” to get data file.
Done! That’s how we read BMW EWS2/EWS3/EWS4 no soldering.
Read also:
Xhorse XDNP50 EWS3 Adapter Step-by-Step Tutorial(No Soldering)?
How to use VVDI Prog and VVDI2 Program BMW X3 EWS4.4 2007?