Menu
Categories
Condor XC-MINI and VVDI Key Tool Toyota G Cloning Steps
September 13, 2017 Key Cutting Tool

Condor XC-MINI Key Cutting Machine cut new Toyota Key,then use VVDI Key Tool Clone G key.This blog is about the Condor XC-MINI and VVDI Key Tool Toyota G Cloning Steps.(Get New  Xhorse Condor XC-Mini Plus Key Cutting Machine)

vvdi-key-tool-toyota-g-clone-new-1

Part one:Condor MINI Cut Toyota TOY47 key

1.Start Condor mini key cutting machine,choose “cut by bitting”

condor-xc-mini-cut-citroen-six3-1

2.Choose detailed Toy47 key type.

condor-mini-toyota-toy47-key-1

3.Put the original key on clamp,tighten it.

condor-mini-toyota-toy47-key-2

4.Press “Key Decode”,then start to decode.

condor-mini-toyota-toy47-key-3

condor-mini-toyota-toy47-key-4

5.After decode,put the new key blade on the clamp.

condor-mini-toyota-toy47-key-5

6.Cut new key

condor-mini-toyota-toy47-key-7

condor-mini-toyota-toy47-key-6

Part Two:VVDI Key Tool Toyota G Clone

1.VVDI Key Tool,choose “Transponder Clone” function.

vvdi-key-tool-toyota-g-clone-new-2

2.Put the original key to read.

vvdi-key-tool-toyota-g-clone-new-3

3.Put the chip to write.

vvdi-key-tool-toyota-g-clone-new-4

4.Write success.

vvdi-key-tool-toyota-g-clone-new-5

5.Put the chip into new Toyota key.End.

*