Condor XC-MINI Key Cutting Machine cut new Toyota Key,then use VVDI Key Tool Clone G key.This blog is about the Condor XC-MINI and VVDI Key Tool Toyota G Cloning Steps.(Get New Xhorse Condor XC-Mini Plus Key Cutting Machine)
Part one:Condor MINI Cut Toyota TOY47 key
1.Start Condor mini key cutting machine,choose “cut by bitting”
2.Choose detailed Toy47 key type.
3.Put the original key on clamp,tighten it.
4.Press “Key Decode”,then start to decode.
5.After decode,put the new key blade on the clamp.
6.Cut new key
Part Two:VVDI Key Tool Toyota G Clone
1.VVDI Key Tool,choose “Transponder Clone” function.
2.Put the original key to read.
3.Put the chip to write.
4.Write success.
5.Put the chip into new Toyota key.End.