BMW FEM/BDC Test Platform Works with VVDI2 BMW Key Programmer

VVDI2 BMW software newly add FEM/BDC function,it needs to open authorization separately.And for BMW FEM/BDC,BMW F20/F30/F35/X5/X6/I3 test platform is easy to detect FEM BDC Control Module in good condition,you can use BMW FEM/BDC test platform to work with.


1.BMW FEM/BDC BMW F20 F30 F35 X5 X6 I3 Test Platform Function and Features:
1.Working together with BMW FEM/BDC key programmer like our Xhorse VVDI2 BMW and BMW F series FEM Blade key , FEM BDC Module Test Platform is a great helper of key programming, ECU programming and basic diagnosis.
2. No need start-stop button.
3. FEM BDC Module Testing Platform is designed with 4 ports which can connect to engine, gearbox, instrument and an extended port to connect with other modules.
4. It features in good induction, frequency resonance, the stainless steel shell (the copper wire inside it is very thick).

2.BMW FEM data desktop test platform




1. Can detect FEM/BDC control module in good condition or not.No need to test them on the car, very convenient and efficient.
2. To match FEM/BDC key and reset KM, this test platform has to work together with Yanhua BMW FEM key programmer
2. Comes with START button and switch status indicator, so doesn’t need extra START/STOP switch and dashboard, and the dashboard connector is reserved.

Pic. 1 Cables & adapters wiring connection diagram

Key Position
Pic. 2 Emergency-Start coil position

Put the key marked with red (see above pic.2) on the coil.

START/STOP button operation
D1: START/STOP button’s indicator- light on when the power supply is connected

D2: Automatic stop and start function (MSA) indicator- default status: light off

D3: Engine fire shutoff switch’s indicator (to replace the dashboard and display the status of the engine fire shutoff switch)- light on when the switch is turned on and light off when the engine is turned off

How to turn on the engine fire shutoff switch:

Put the working key on the coil;

Press the button;

Engine fire shutoff switch indicator (D3) lights on;

(If the indicator fails to light on, wait for 3-5 seconds and press it again)

How to turn off the engine fire shutoff switch:

Press it continuously for 3 times;

Engine fire shutoff switch indicator (D3) lights off- engine fire shutoff switch is turned off

Original:BMW FEM/BDC Test Platform Works with VVDI2 BMW Key Programmer