VVDI Pro read EWS3 trying 0% solution

Posted on by Sales xhorsevvdi.com

VVDI Pro reads EWS3 by connecting the EWS3 adapter, get error ” Trying 0% ” and then ” device error”.

vvdi-pro-ews3-error

What I use VVDI Pro and EWS3 adapter are the original ones:

Image source

vvdi-prog-a1 vvdi-prog-ews3-adapter-5

Image source

Solution provided by Xhorse engineer:

Try to plug a 12V power supply to read. 

If you have the same question or any other suggestions, please contact at:

E-mail:sales@xhorsevvdi.com
Skype: xhorsevvdi.com
Whatsapp: 0086-13983756354

Who Views This Also Viewed:

  1. How to Solve VVDI PROG Read D70F3624 Try Frequency Failed Error
  2. How to Solve VVDI Prog Verify/Write “Check Failure” Error?
  3. (Solution) How to read HC08AZ32 by VVDI PROG Programmer?
  4. Solution to VVDI Pro read Fuji chip found no chip
  5. VVDI Prog Read/Write/Erase ATMEL AT24C16 EEPROM&Flash

Sales xhorsevvdi.com

More Posts Twitter Facebook LinkedIn