This article is going to show you how to program Audi S5 2010 AKL via OBD using VVDI Key Tool Plus Pad.
Immo Programming>>Europe>>Audi>>Automatically diagnose models
5th immo system.
Read BCM2 Data>>OBD Identify BCM2 Type
Connect Key Tool Plus Pad to OBD port.
This model supports data reading via OBD.
Read by OBDII>>Read BCM2 Data (OBD II)
Key count 2.
Disconnect BCM module for 2-3 seconds
Perform “Read BCM2 Data (OBD II)” function again.
Read and save BCM2 data.
Enter “Make Dealer Key”.
Select car model and load BCM2 data.
Put a new key into coil and write data in.
Enter “Learn Key”.
Load BCM2 data again.
Insert new key into/ close to ignition, turn on headlamp, and hold down brake.
That’s how Key Tool Plus Tablet programs 2010 Audi S5 AKL via OBD.
CRE: Keys na América