How to use VVDI2 to program VW Touareg 2008 46 Transponder Key

VVDI2 Commander Key Programmer Full Version,it is V1.1.7 version.And here we display VW Touareg 2008 46 Transponder Key Programming steps.

vvdi2

1.Start vvdi2 software,choose VW car brand.

vvdi2 programmer

2.Switch ON ignition with original key.

vvdi2 commander

3.Select Key Learn tab>4th immobilizer system–VW/Skoda/Seat>Touareg/Phaeton/A8/Cayenne/Bentley Immobilizer

4.Select Get component security from Engine Control Unit (ECU) via OBDII.Click Auto detect from engine (ECU)

vvdi2 key programmer

5.Read Component security bytes and PIN (Login) code

6.Then it will display “VVDI 2 prompt Only support read PIN,CS,MAC now, the read data now the whole EEPROM.
Continue?”Press Yes to continue.

7.The software will show “Warming: The 7th byte CS is 00,may be this byte is error. Please find 7th byte CS from working key.”Please Click OK to continue.

8.Click “Make Dealer Key”,and insert a working key to VVDI2 Key Programmer.

vvdi2 programmer

9.Component security find OK, 7th byte is 3C.
Now take off the original key and put in the key which you want to program.When the page shows “Do you want to continue.”Please press Yes to continue.

vvdi2 key programmer

10.Change 7th byte from 00 to 3c.Select Make Dealer Key.Waiting the process to make key.

11.After key made okay and locked,select Key Learning.

12.Switch OFF ignition and remove key, then insert again the key and switch on the ignition.

Sales xhorsevvdi.com