CONDOR XC-MINI Key Cutting Machine package includesÂ 1pc x 2.5mm Cutter,1pc x 1.5mm Cutter.If your cutter is broken,you can purchase extra cutter from us to exchange.XhorseVVDI.com shares the steps how to install the cutter and the clamp.
1.Install the cutter of Mini Condor
1. Put the cutter into the cutter hole and to the top limit position, ensure the section of cutter and clamp lateral parallel
2. Turn the CUTTER LOCK SCREW
2.Remove the Cutter
1. Hold the cutter lightly, Turn the CUTTER LOCK SCREW counterclockwise
2. after the cutter loosen, remove it
3.Install the Clamp
1. Turn the LOCKING WRENCH counterclockwise on the left side to loosen.
2.Choose the clamp according to the key type, Push the clamp from the right side of the CLAMP CARRIAGE to limit position
3. Turn the LOCKING WRENCH clockwise to tighten the clamp