Xhorse is about to release its BMW G-series BDC2 Add Key solution.
Users need to buy BMW-G BDC2 Adapter and activate BMW license on Xhorse Tools (VVDI Key Tool Plus, VVDI2).
Here we will show you how to add key for BMW G-Series BDC2 with Key Tool Plus and Xhorse BMW G-Series BDC2 Adapter.
Xhorse BMW BDC2 Adapter is on sale now:
1. Free BMW G-chassis-BDC2 immo system activation is included with the purchase of an adapter for pre-orders only.
2. The pre-order period runs from today (July 31, 2025) until August 14, 2025, Chinese time.
3. Please note: Activation after the pre-order period ends will require payment.
Guide:
Connect BDC2 Adapter to BDC2 unit by diagrams.
*Make sure PINS are connected, especially eeprom pin2
Tighten adapter.
Then connect adapter to Xhorse Tool (here we use VVDI Key Tool Plus) and power adapter.
Turn on adapter and check connection by lights.
*If high or low voltage, lights may flash or be dark
On Key Tool Plus,
Select
Immo programming>>More Function>>Test Function
Read vehicle info.
Preprocess BDC2 immo system.
Select ‘Step 1.Back up coding’.
Select ‘Step 2.Service Mode’.
Select ‘Step 3. Read key’.
Select ‘Step 4. Programming’.
Select ‘Step 5. Restore Coding’.
Go back and select ‘Generate dealer key’.
Load key file and make dealer key.
Then just go into vehicle and learn new key.
Done! That’s how to add key for BMW G-series BDC2 using Xhorse Key Programmers.
Skype: xhorsevvdi.com
Whatsapp: https://wa.me/8613983756354
Whatsapp: 
Skype: