V7.5.0 vvdi2 newest software newle add the function for BMW G-Series BDC2 type – Require license+BMW-G BDC2 Adapter. The Xhorse BMW G series bdc2 license and adapter will release soon.
How to connect Xhorse BMW-G BDC2 Adapter with VVDI2, Key Tool Plus?
1. Align the 3 positioning pins with the corresponding holes on the chassis.
2. Press down firmly on th adapter at the CON7/CON8 locations until it is fully seated.
3. Verify the accurate positioning of the RST/EEPROM_2/GND pins.
4. Slide the adapter latch to the LOCK position.
1. Connect the included cable harness to the device.
2. Connect the adapter power lince to PIN 1.
3. Supply +12V power.
Xhorse BMW G-Series BDC2 Support List:
1. Support add key function for BMW G-Series BDC2 type – Require license+BMW-G BDC2 Adapter
Support following list:
5-Series G30 2016/11-2020/06
5-Series G31 2017/03-2020/06
5-Series G38 2017/05-2020/08
6-Series G32 2017/07-2020/06
7-Series G11/G12 2015/07-2019/02
X3 F97 2019/04-2021/07
X3/IX3 G08 2018/05-2021/08
X3 G01 2017/12-2021/07
X4 G02 2018/04-2021/07
X4 F98 2019/04-2021/07
M5 F90 2017/11-2020/06
For more specific steps, you can check the following blog:
Xhorse VVDI Key Tool Plus and BMW G-Series BDC2 Adapter Add Key Guide
Whatsapp: 
Skype: