VVDI MB Read W203 EIS via OBD and IR Fail Solution

Question:

VVDI MB read an EIS of a Mercedes C270 W203 2002 via OBD, and it says “Can’t start communication with EIS, check connection!”.

vvdi-mb-read-w203-eis-via-obd-and-ir-fail-solution-1

Try via IR, and it says “Current EIS don’t support read password via IR!”.

vvdi-mb-read-w203-eis-via-obd-and-ir-fail-solution-2

Here Xhorsevvdi gave the

Solution:

1.Select IR mode if trying via IR

vvdi-mb-read-w203-eis-via-obd-and-ir-fail-solution-3

2.If the error remains, then remove EIS and read it using VVDI PROG

1)Read by soldering

vvdi-mb-read-w203-eis-via-obd-and-ir-fail-solution-4

vvdi-mb-read-w203-eis-via-obd-and-ir-fail-solution-5

vvdi-mb-read-w203-eis-via-obd-and-ir-fail-solution-6

vvdi-mb-read-w203-eis-via-obd-and-ir-fail-solution-7

vvdi-mb-read-w203-eis-via-obd-and-ir-fail-solution-8

Hope this could help!

https://www.xhorsevvdi.com/

Skype: xhorsevvdi.com

Whatsapp:+86-13983756354