How to Program Xhorse TPMS Sensor by Copying ID?

The other day we’ve shown you how to learn Xhorse TPMS Sensor.

Today we will show you an easier way to program it, that is copying original TPMS sensor ID.

1.Find ID number on sensor

On original sensors, you may find ID number.

On Key Tool Max Pro,

Select

Program>>Manual create

Enter original sensor ID.

Confirm ID and it is done.

2.Activate sensor and identify ID

If there is no ID number or it is vague, you may activate sensor first and then identify ID using Key Tool Max Pro.

Select

Program>>Activate copy

If original sensor is out of power, you have to remove it and replace battery before activating it.

3.OBD programming

Some cars allow you to program sensor via OBD.

Connect Key Tool Max Pro to OBD port.

Select

TPMS>>Toyota>>Corolla>>2019.01-2022.12(C215 433MHz)

If the tool shows ‘Diagnostics’, it means this car supports OBD programming.

Select

OBD read ID>>Program>>OBD Copy

Install programmed sensors and they will work find.

If you still don’t know how to learn sensors, check out

How to Use Xhorse XDTPM1EN TPMS Sensor?

Done! That’s how to program Xhorse XTPMS Sensors.

https://www.xhorsevvdi.com/

Skype: xhorsevvdi.com

Whatsapp: https://wa.me/8613983756354