xhorse condor key cutting tool
Condor Mini Plus II can cut VW HU162T keys, including HU162T-7, HU162T-9, HU162T-10. Here is a review: Xhorse Condor mini plus ll HU162T-9 Audi Q2 2020 key cutting Check out the process: First we need to decode lock using… Continue Reading
One customer wondered if the battery of his Xhorse Dolphin XP005 is broken. When he rebooted machine, it kept showing out of charge and “BIOS”. He had updated firmware without problems. Here is how to solve it: Charge machine for… Continue Reading
One customer asked if the battery is broken, since his Xhorse Dolphin XP005L kept showing “battery power more than 25% before firmware update”. And he could not update firmware and update is stuck at 0%. It seems a battery issue.… Continue Reading
Xhorse new release Dolphin XP-005 Key Cutting Machine with M5 Clamp, and you maybe confused how to choose old Dolphin XP-005 and new Dolphin XP005 with M5 clamp? 1. What is the new features of Dolphin XP005 with M5 clamp?… Continue Reading
One customer gave feedback that his Dolphin XP005L won’t turn on but he had already charged it for overnight. Here we are going to show you how to fix this problem. 1.Test Battery Details Connect Dolphin XP005L Machine to… Continue Reading
One customer gave feedback that his Condor Mini Plus II did not work. And it kept prompting Error 57 even after he had changed its probe. Here is the Reason: Probe is short-circuited. Solution: Take apart Condor II Machine… Continue Reading
One Dolphin XP005L user gave feedback that he could not fix Xhorse M3 Clamp. Are there some screws missing? M3-A Clamp is tightened well but M3-B Clamp is not. Here Xhorsevvdi Tech answers: We need to install screws before swapping… Continue Reading
Question: I need to cut short keys with the Xhorse Dolphin XP-005L but it does not seem to have this capability. Is there another jaw that can work to cut keys that are short? Here is the way: Use M4… Continue Reading
One user gave feedback that his Dolphin XP005 did not cut key well. The probe won’t move to decode whole blade. Here are original key and new key. Here is the Solution: Select key blade option marked by EXTRA. (Path:… Continue Reading
M4 Clamp shim could help fix blades on Xhorse Dolphin Machine, but what replacements can we use if we lose it? Here is the Answer: The shim is around 1.12mm thick, use something of the same or close thickness. Battery… Continue Reading
Question: Xhorse Condor Mini Plus II Machine,No error it’s just make weird noise. The it starts shaking. Only the cutting side. Feel like I have to tie it up from inside. Here Xhorsevvdi tech shares the Solution 1: Tighten screws… Continue Reading
Question: Condor Mini Plus II, The machine was working fine for a few weeks after placing mother board. It has broken probe and cutter because it brakes when machine doesn’t wanna go up. Maybe Z axis motor idk. Motor Measurement… Continue Reading
E-mail:sales@xhorsevvdi.com
Whatsapp: +86-13983756354
Live Chat: Online Service
Skype: xhorsevvdi.com
