Successfully programmed a 2015 Maserati Ghibli with all keys lost using the Xhorse VVDI Key Tool Max! The password was read successfully, and the new key was added smoothly without any issues. The same procedure can also be performed using the Xhorse Key Tool Max PRO.
1. Read the Security Password
Navigate to Immo Programming >> Maserati >> Ghibli >> Smart Key (2013–2015) >> Smart Key System >> Start Execution >> Read Password.
Turn on the security light and switch off the ignition as prompted. The security password is successfully read as 8942.
Select Key Count to check the number of currently registered keys. The vehicle shows 2 keys recorded.
2. Enter Key Learning
Select Add Key >> Type 1. Turn off the ignition and switch on the hazard lights. Make sure only the smart key being programmed is inside the vehicle, and remove all other keys. The Key Tool Max should display a current key count of 2. Press Yes to continue, then enter the password 8942.
3. Program the New Smart Key
Press the LOCK or UNLOCK button on the new smart key once, then click OK to proceed. Place the smart key in the center console area or near the START button. Within 60 seconds, repeatedly press the UNLOCK button until the door locks cycle, confirming successful key programming.
4. Verify the Key Count & Start the Vehicle
Select Key Count again to confirm that the registered key count has increased to 3. Then test the newly added key to make sure it starts the vehicle successfully.
Final Check
Start the Maserati Ghibli and test the locking and unlocking functions. The engine starts normally, and both the lock and unlock functions operate correctly.
Skype: xhorsevvdi.com
Whatsapp: https://wa.me/8613983756354
Whatsapp: 
Skype: