Xhorse Multi-Prog Read and Write Land Rover Discovery 4 BCM & KVM OK

The Xhorse Multi-Prog programmer was successfully used to read and write the Land Rover Discovery 4 BCM and KVM modules.

For this job, the BCM was AH22 14F041 AG, using an XEP768 MCU from 2009 onwards. The KVM was DPLA 19H440 AD, with an MC9S12XET256 MCU. A virgin file was prepared for the KVM.

After successfully reading and writing the BCM and KVM data with Multi-Prog, the modules were installed back into the vehicle. The BCM and KVM software were then flashed using the dealer SDD software, completing the programming process successfully.

This case demonstrates that Xhorse Multi-Prog can be a useful solution for reading, writing, and preparing Land Rover Discovery 4 BCM and KVM modules.

xhorse-multi-prog-read-and-write-land-rover-discovery-4-bcm-kvm-ok-1