Xhorse Multi-Prog Firmware Update Failure & Fix Guide

Posted on by Sales xhorsevvdi.com

Problem:
When upgrading Xhorse Multi-Prog firmware from v1.36 to v1.45, the update may fail with the error:
“Jump Recovery error: 41330004 – fails to communicate with the SC chip.”

multi-prog-update-firmware-jump-recovery-error-1

multi-prog-update-firmware-jump-recovery-error-2

Solution: Forced Upgrade

  1. Power off the device.
  2. Press and hold the Reset button.
  3. While holding Reset, power on the device.
  4. Keep holding for about 5 seconds, then release.
  5. Retry the firmware update.

multi-prog-update-firmware-jump-recovery-error-3

multi-prog-update-firmware-jump-recovery-error-4

multi-prog-update-firmware-jump-recovery-error-5

This method usually restores communication and completes the upgrade successfully.

https://www.xhorsevvdi.com

Skype: xhorsevvdi.com

Whatsapp: https://wa.me/8613983756354

Who Views This Also Viewed:

  1. How to Solve Multi Prog Update Error code 41330004?
  2. How to reset Xhorse Multi Prog?
  3. How to install, update Xhorse Multi-Prog software?
  4. Xhorse Multi-Prog V87 Update: Direct Factory Key Read & Write, No Data Conversion Needed
  5. Solved! VVDI Multi Prog No Connection in Device Manager

Sales xhorsevvdi.com

More Posts Twitter Facebook LinkedIn