vvdi multi prog

Question: With Multi Prog ECU Programmer I read and wrote a frm mini cooper. I wanted to know where I can find the file for the repair? Here is the Answer: On Multi Prog, select FRM repair options (Adapter or… Continue Reading →

One customer gave feedback that the screen on Xhorse Multi Prog was broken. And he just received the package. Where to get a replacement? Here is the Solution: Open Multi Prog ECU Tool and unplug and plug wires inside.  … Continue Reading →

One customer asked if Xhorse Multi Prog PRO could repair odometer for Audi A3 2017. The cluster chip pictures are shown below. Here is the Answer: ARM chips are not supported for odometer repair.   Good to Know: 1)VVDI2 Programmer… Continue Reading →

Question: Xhorse Multi Prog ECU Programmer and MQB Rh850 Cable I tried to read r7f701407 dashboard, but I can’t connect the dashboard. Here is the Answer: Check pinout again, remove all extended cables, and solder MCU cable to pins directly. Done! Hope this helps! https://www.xhorsevvdi.com/ Skype:… Continue Reading →

Here is a review of Multi Prog ECU Programmer: Cloning ECU Chevrolet Express 2014 E37 AcDelco with Xhorse Multi Prog equipment Old E37. Connect Multi Prog to old E37 on bench. Read original eeprom and flash data. Connect Multi Prog… Continue Reading →

One customer asked if Multi Prog could read program eeprom from his 2007 Audi Q7. The immobilizer board burned because of relays. J518 steering lock eeprom written to the J518 emulator, will Multi Prog support this job? Here is the Answer: VVDI Multi Prog ECU Programmer… Continue Reading →

One customer gave feedback that his Multi Prog won’t read ROVER BCM 2017 SPC5748 MCU. He asked if it is not supported by the tool. Here Xhorse tech support answers: Double-check wiring diagrams. Or try this pinout. Done! https://www.xhorsevvdi.com Skype:… Continue Reading →