vvdi multi prog

Problem: Read am29f400bb ok but cannot write it. I use Xhorse Multi Prog. The error code is 11030001. Should I desolder the chip? Here is the Solution: 1)Select ‘Erase’ and read data, and see if all data show 0xFF 2)If… Continue Reading →

Question: Xhorse Multi Prog reads ME17.9.64, it is stuck on this screen for quite a long time and gives connection errors, how to solve the problem? Here is the Solution: This error will be fixed later. Now select ‘test channel… Continue Reading →

One customer gave feedback that Xhorse Multi Prog won’t read VAG Continental SDI10.4. The tool showed ‘Server calculation error’, so is the server down? Here is the Solution: This error will be fixed later. Users can select ‘test channel 18’… Continue Reading →

Question: Xhorse Multi Prog, I see dflash immo and ONLY read NO WRITE and no dflash clone how can I write this bcm, JEEP Renegade BCM R7F701034? Answer: Download Database again and it will give a way to clone D-flash.… Continue Reading →

Multi PROG works great in cloning ECU. Here is a review: 2013 Dodge Ram 2500 BCM Clone w/ Multi-PROG   Check out how it’s done. PINOUT. Take out PCB and connect it to VVDI MULTI PROG. Read Code Flash. Connect… Continue Reading →

Question: This Xhorse Multi Prog not working. Need reading eis w211 hc12. Here is the Solution: Double check Red (VCC) and Yellow (RESET) wire. Done! Hope this helps! https://www.xhorsevvdi.com/ Skype: xhorsevvdi.com Whatsapp: https://wa.me/8613983756354

One customer wondered where to find EDC17/ MED17 data calculation and immo off function menu on VVDI Multi Prog. And where is the data decoder menu.   Data Calculation Function: All ecus marked by a ‘C’ have checksum. It supports… Continue Reading →

Question: me7.1 Won’t start reading gives me error. Tested with Ecu Adapter and obd because I have bench obd adapter for this ECU (mpps works ok), but still the same error from Xhorse Multi Prog. It says “Error code: 07030009 The… Continue Reading →