Question: VVDI PROG Software gave “Read Error(00)” when cracking an MQB dashboard. Connection is wrong? Here is the Solution: Dashboard data is already cracked and saved in path below. Go to VVDI2 MQB Software and decode immo data. If… Continue Reading
Question: MQB License activated, and VVIDPROG read chip data no problem, but after I loaded data, no immo data displayed on VVDI2 Software. Here Xhorsevvdi tech shares Reason: Wrong menu to load data. Solution: 1.To make dealer key, decode… Continue Reading
One customer gave feedback that the phone doesn’t connect with Xhorse XP005L Machine by Bluetooth. It connects and then disconnects. Here Xhorsevvdi tech shares Solution: Turn off Automatic connect, exit and back to the screen again, select Bluetooth option and… Continue Reading
In this article we are going to reset a PCF7937 key using VVDI PROG Software. Original key is PCF7937 and locked in VVDI2 Software. Direct connect VVDI PROG to key chip using PCF79XX Adapter. Select 2-MCU>>NXP-PCF79XX>>PCF7941_IN-CIRCUIT Read Chip. Chip is… Continue Reading
One customer gave feedback that he had problems with reading MQB virtual dashboard. VVDI PROG Tool did not crack it. Connection: MQB License was activated, yesterday job done with d7f03532. Here is the Error List: If ID is read, connection… Continue Reading
Question: Toyota XM38 Remote, cannot get TOY48 blank (i.e. 2012 Highlander or 2010 style Prius prox key) to insert into case. It only goes as far as photo. Is there a trick? Only one-side TOY48 blanks fit in XM38 Remote,… Continue Reading
One customer gave feedback that Dolphin XP008 did not support his key. His key looks the same as the supported one that should be cut by side C. Here is the Reason: His key is flat key, which is different… Continue Reading
In this article, we’ll show you how to decode VW MQB door lock and cut a HU162 9-cut key. Tools: LISHI HU162-T (9) Dolphin XP-005 Machine Key Tool Plus Tablet Step-by-step Procedures: Select HU162-T (9) control. Select “All Key… Continue Reading
Xhorse 8A Non-smart Cable is designed for Toyota blade key programming. Here is a review: 2021 Hilux 2gd-ftv all lost key. Chip H 8A. Use key tool max, mini obd tool and 8a control box cable. Procedures Remove relay… Continue Reading
Question: Dolphin XP005L Machine works, as long as it’s got power cable, also there’s no sign of charging. Without both cables it doesn’t work at all. I’ve left it on charge for 3 hours, but the result is the same.… Continue Reading
Question: Possible to use VVDI Super Chip on Autel? Here we are going to test VVDI Super Chip XT27A and XT27B on both Autel KM100 and Key Tool Max. 1.XT27A Chip is set as Blank Hi-tag PCF7946A on… Continue Reading
One customer gave feedback that there is no voltage on Xhorse Key Tool Plus. He tried to read an EIS W164 and wondered if the wiring is correct. Here Xhorsevvdi tech shares the XDKP30 Adapter Connection: KeyToolPlus Tablet>>XDKP30 Adapter>>EZS Adapter… Continue Reading
E-mail:sales@xhorsevvdi.com
Whatsapp: +86-13983756354
Live Chat: Online Service
Skype: xhorsevvdi.com
