The Xhorse BMW BDC2 Adapter is designed to simplify bench programming and key learning for BMW G-Chassis vehicles. It can be used with the Xhorse VVDI2, Key Tool Plus Pad, or Key Tool MIDI to add new keys without soldering. This guide walks you through the proper installation process of the BDC2 Adapter with the VVDI2 programmer.
Step-by-Step Installation Guide
Step 1: Align the Adapter
-
Begin by locating the three alignment markers on both the BDC2 module and the Xhorse BDC2 Adapter.
-
Carefully align the adapter with the BDC2 module so that the markers match precisely.
-
Ensure the adapter sits flat before applying any pressure.
Step 2: Secure the Adapter
-
Once the adapter is correctly aligned, press it firmly downward until you feel or hear a click.
-
Engage the locking clip to ensure the adapter remains securely connected during use.
Step 3: Power and Connect
-
Connect the VVDI2 programmer to the Xhorse BMW G Series BDC2 adapter using the appropriate cable.
-
Supply 12V power to the adapter either through an external power supply or a vehicle battery.
Verification
-
Once connected and powered, the LED indicator on the adapter will light up.
-
This indicates a successful connection between the adapter and BDC2 module.
Troubleshooting Tip
If the LED does not illuminate:
-
Double-check the adapter’s alignment with the BDC2 module.
-
Confirm that the 12V power supply is stable and properly connected.
With the adapter correctly installed, you’re ready to proceed with BMW G-Series key programming using VVDI2 or compatible tools.
Read also:
How to Get Free Activation for Xhorse BMW BDC2 IMMO License?
Skype: xhorsevvdi.com
Whatsapp: https://wa.me/8613983756354
Whatsapp: 
Skype: