xhorse condor key cutting tool
I need tech support for my mini condor plus 2, the resistor isn’t there so I’m assuming it’s new board style what should I do in order to fix the issue ? Here is the suggestion from Xhorse engineer: MINI… Continue Reading
Question: Condor XC-Mini Plus II Machine, this is what I decode. This is what it cuts notice the shoulder on the bottom of that key where the edges cut is tapered for some reason it cuts that off at an… Continue Reading
Question: Can’t update Dolphin XP005L Machine, just keeps showing BIOS mode and won’t let me update firmware. Here is the Solution: Unplug the green cable from battery, update firmware, and plug in the green cable. Complete! Hope this helps! https://www.xhorsevvdi.com/… Continue Reading
Question: The M4 Gasket of the Dolphin XP-005L brings these accessories. The big ones I guess are for the tops in the lines. Can anyone tell me what the wires I’m pointing to in the picture are for? Here… Continue Reading
Question: Xhorse Condor XC002 PRO Machine says E0001 and smells a bit? Here is the Solution: Open the back cover and tighten the two screws or loosen them if they are overtighted. Done! Hope this helps https://www.xhorsevvdi.com/ Skype: xhorsevvdi.com Whatsapp: https://wa.me/8613983756354
How to get key code when all keys are lost with Xhorse Key Cutting Machine? Generally key code is on the key lock and we have to remove it first. Here we will show you how. 1)Remove key lock and… Continue Reading
One customer asked how to cut by bitting on house keys using Xhorse Dolphin XP005L Machine. Here is the Answer: Dolphin XP005L mainly cuts car keys, so for house keys, Condor MINI PLUS II is a better choice. But Dolphin… Continue Reading
One customer gave feedback that his Condor XC-MINI Plus II cutter broke before finishing key cutting. Here are tests required by our tech. Test main motor, all good. Here is the Solution: Open Condor Mini Plus II Machine and check… Continue Reading
One customer gave feedback that Dolphin XP005 Machine would not hold his keys tightly. He wondered if the keys were not supported or other clamps are required. Here is the Answer: If the keys are too short, Dolphin XP005 Key… Continue Reading
One customer gave feedback that Dolphin XP007 Key Cutting Machine could not hold keys. The clamp won’t work on any key. Here is the Answer: Clamp is installed wrong. Reverse the clamp and it will hold keys tight. Read More:… Continue Reading
Xhorse Dolphin II XP-005L Key Cutting Machine , newly add Angle-adjustable LCD touch screen and Protective Shield, Built-in Lithium Battery, More Portable, Only 13KG, Easy to carry. and we received customer feedback that when enter, the screen asks for the… Continue Reading
Here we are going to show you the way to measure battery voltage of Dolphin XP005/ Dolphin XPP05L Machine. Steps: 1.Select DC power supply gear, measure the voltage of these two pins of the battery, and send tech support… Continue Reading
E-mail:sales@xhorsevvdi.com
Whatsapp: +86-13983756354
Live Chat: Online Service
Skype: xhorsevvdi.com
