If Xhorse Dolphin XP005 or XP-005L battery is broken, buy this battery to replace. New Type, Xhorse factory has optimized the new silver battery. Here is the guide about How to Measure the New Version Battery on Xhorse Dolphin XP-005 / XP-005L
Unscrew the 8 screws
Detailed Annotation
1 Indicates “PWR ON”, which is the power switch.
a Indicates GND
b Indicates VCC 3V
c Indicates VCC 5V
① Method for measuring the battery cell
If the measured voltage is 3.3 V according to the method shown in the figure, it indicates that the battery cell is in good condition.
Note：The coating on the 3.3V test point needs to be removed to measure the voltage.
② Method A for measuring BMS
If the measured voltage value is 5V, it indicates that the BMS is in good condition.
Note: The power switch needs to be turned on.
② Method B for measuring BMS
If the back cover is not removed, the PWR ON should be short-circuited as shown in the diagram and then test a & c as last page.
If the measured voltage value is 5V, it indicates that the BMS is in good condition
Whatsapp: 
Skype: