Xhorse Iscancar VAG MM-007 Diagnostic and Maintenance Tool English language will come soon.And like Iscancar VAG 3.0 update online,VAG MM-007 can also support update online with update tool software.
1.Xhorse Iscancar VAG MM-007 Product Display
2.Xhorse Iscancar VAG MM-007 Update Information
V2.1.8 (2017-07-18)
———————————————
1:Add EA111 UDS engine check oil level.
2:Add EA111 UDS genine clear value adapt throttle.
3:Add UDS EPB set “VIN check” option.
4:Add GTI7.5 3Q0907338 parameter file.
5:Add Audi start-stop setting.
6:Add Audi A4(2017) sports needle.
7:Fix 4B unit connection bug.
8:Change some description of parameter files.
V2.1.8 (2017-07-18)
———————————————
1:Add EA111 UDS engine check oil level.
2:Add EA111 UDS genine clear value adapt throttle.
3:Add UDS EPB set “VIN check” option.
4:Add GTI7.5 3Q0907338 parameter file.
5:Add Audi start-stop setting.
6:Add Audi A4(2017) sports needle.
7:Fix 4B unit connection bug.
8:Change some description of parameter files.
V2.1.6 (2017-05-15)
———————————————
1:Add magotan/CC replace new comfort module.
2:Add MIB RCTA sensors setting.
3:Add some controller configuration parameter files.
4:Add SD card format &create folders.
5:Add recover coding after refresh parameter files.
6:Fix other bug.
V2.1.4 (2017-04-27)
———————————————
1:parameter refresh write multi data blocks one time.
2:Fix can’t auto detect instrument type when read PIN.
3:Add parameter files as below:
3.1: New lavida steering assistance 180909144.
3.2: skoda PQ superb kessy.
3.3: lamando kessy three antennas.
3.4: VW411 kessy 5K0959434H.
3.5: VW411 BCM light data. 5K0937087AG.
3.6: VW411 DCC 3C0907376x.
3.7: VW411 gateway(active/deactive MKE).
3.8: VW411 DSP config data(fender/dynaudio).
3.9: VW411CS headlight AFS.5M0907357G.
3.10:VW411CS front camera,3Q0980654.
V2.1.3 (2017-04-22)
———————————————
1:Add 2017 sharan light data.
2:Add xenon static AFS.
3:Fix reprogram BCM firmware bug.
4:Fix reprogram UDS module bug.
5:Add parameter files as below:
5.1: lamando ACC 5Q0907572A/B/D.
5.2: lamando PDC 5Q0919294.
5.3: lamando PLA 5Q0919298A/D.
5.4: lamando Kessy 5Q0959435A.
5.5: lamando Gateway 5Q0907530N/Q.
5.6: lamando rear left door 5Q4959393B/595B.
5.7: lamando rear right door 5Q4959393B/595B.
5.8: VW37x headlight AFS 5Q0907357/A/D.
5.9: VW37x SWA 5Q0907686.
5.10: VW37x front camera 5Q0980653C/E/F.
5.11: VW37x steering assistance 5Q0909144P.
V2.1.2 (2017-04-13)
——————————————–
1:Add PQ MIB clear DTC after updating firmware.
2:Add PQ MIB golden menu.
3:Add sharan sliding door basic setting.
4:Add Lane keep for 30 seconds.
5:Add 0AM DSG Software Nr Index Version GKBS.
6:Add some parameter files.
7:Fix some bugs.
V2.1.1 (2017-04-01)
——————————————–
1:Fix SD card refresh xml parameter files bug.
2:Add PQ MIB adapt dashboard test.
3:Add NEC+24C64 EEPROM function.
3.1:Park braking type.
3.2:Number of fuel tanks.
3.3:MFW type.
3.4:Temperature unit.
3.5:Distance unit.
3.6:Speed unit.
3.7:Time format.
3.8:Comsumption format.
3.9:Sun roof indicator.
3.10:Side indicator.
3.11:DPF indicator.
3.12:Parking indicator.
3.13:Engine indicator.
3.14:Oil temperature menu.
3.15:Refuel volume menu.
3.16:Support menu.
3.17:Logos.
3.18:Alternative logos.
V2.1.0 (2017-03-27)
——————————————–
1:Add gateway list state.
2:Add touranL auto air conditioner wind speed display.
3:Add VAG addtional information code description library.
4:Add PQ MIB amplifier setting.
5:Add 2017 3D color dashboard golden menu setting.
6:Add lamando1.4T driver door/passenger door config parameter filesˇŁ
7:Add NMS soundsystem config parameter files.
V2.0.9 (2017-03-17)
——————————————–
1:Add TiguanL parameter files.
2:Fix Magotan/CC convience adaption.
3:Fix controller adaption menu.
4:ODX firmware support up to 60M.
5:Fix color dashboard reprogramming error.
5:Fix others.
V2.0.8 (2017-03-02)
——————————————–
1:Add temporary parking lock door.
2:Add air conditoner self check mode.
V2.0.7 (2017-02-24)
——————————————–
1:Add replace PQ35 dashboard(UDS).
2:Add LED license plate alarm.
3:Fix other error.
V2.0.6 (2017-02-22)
——————————————–
1:Add NEC+24C64 EEPROM function.
1.1:enable dashboard needle self check.
1.2:enable backlight of scales.
1.3:enable backlight of needles.
1.4:enable backlight of needlse for 30 seconds after locking.
1.5:dashboard production mode.
1.6:driving mode.
1.7:handbrake light position.
1.8:welcome menu.
1.9:close engine oil sensor prompt.
1.10:digital speed.
1.11:oil tank feature.
1.12:solve needle shaking after reprogramming firmware.
1.13:oil tank openning prompt.
1.14:DRL indicator.
1.15:white screen LCD type.
1.16:enable TwinDrive.
1.17:trailer indicator.
1.18:dipped headlight indicator.
1.19:front fog light indicator.
1.20:shift gear position P/N prompt.
1.21:speed scales 240/260/280/300km/h.
2:Add uds dashboard service interval setting.
3:Add change new dashboard milleage.
4:Add close dashboard production mode.
5:Add support chinese of SD card files.
6:Add BCM read/write remote keys ID.
7:Fix xml parameter files parse error.
8:Add static DTCs prompt.
V2.0.5 (2017-01-11)
——————————————–
1:Add reprogramming uds unit,support frf/odx format.
2:Add some parameter files.
3:Add DSG gearbox go into neutral gear.
4:Fix other errors.
V2.0.4 (2016-12-14)
——————————————–
1:Add description of many parameter files.
2:Add some parameter files.
3:Fix kwp2000 adaption error.
4:Fix kwp1281 communication error.
5:Fix uds protocal communication error.
6:Fix other errors.
V2.0.3 (2016-12-01)
——————————————–
1:Add sgo format firmware reprogramming.
2:Touareg set four brake light.
3:PQ MIB dynaudio mode.
4:PQ MIB engineering mode.
5:PQ MIB connect two phones.
6:TRW460 ABS coding.
V2.0.2 (2016-11-21)
——————————————–
1:Add reprogramming steering assistance curve.
2:Add some config parameter files.
3:Fix uds dashboard can’t change milleage.
V2.0.1 (2016-06-23)
* Init version