Xhorse Condor XC-MINI Plus Cut HU66 Key Review

Condor XC-MINI Plus is powerful Xhorse key cutting machine,and this blog we will share one Xhorse Condor mini plus key cutting machine cut HU66 review.

Xhorse Condor Mini Plus. It is not cutting HU66 keys correctly. I have RE performed several times, height level adjustment, clamp calibration, and cutter calibration but continue to experience the same problem.

After completion of the cut, the inside of the key cut is a  small amount of material remaining. I am using the 1.5mm cutter. I am using the M2 clamp on the C setting and continue to experience this problem.

I have tried changing the Channel Track Cutting Times to 3 instead of 2 but I continue to experience this problem. HU66 keys are one of the largest volume of keys I will cut and this is a huge problem.


xhorse-condor-xc-mini-plus-cut-hu66-2 xhorse-condor-xc-mini-plus-cut-hu66-3


Please use 2.5mm cutter to cut

That worked and it decoded correctly after the cut with the 2.5mm.


Sales xhorsevvdi.com