This article is a guide on VW Passat 2011 AKL programming by VVDI PROG + VVDI2.
Step 1. Open Door and Get Bitting
Open car door and get key bitting by Lishi Tools.
Step 2. Cut Emergency Key
On Key Tool Max, go to
Cut by Bitting>>HU66>>M2-C Shoulder align
Input key bitting.
Click “Cutting key”, then Dolphin XP005 starts key cutting.
Step 3. IMMO Removal
Remove glove box, then we will see comfort module behind.
Step 4. Read IMMO Data
Desolder EEPROM 95320 and put it on EEPROM adapter.
On VVDI PROG, select “1-EEPROM&FLASH” “ST” “M95320”.
Read and save immo data.
Step 5. Generate Dealer Key
On VVDI2, go to
VAG>>Key Learn>>4th Immobilizer system – VW/Skoda/Seat>>VW Passat/CC Key Learn>>
Select “Get component security data from comfort module dump”, and load immo data file.
PIN code displays.
For CS code, select “Decrypt 7 bytes CS from dump file”, and click “Decrypt 95320 dump”.
CS code displays.
Back to last screen, PIN and CS automatically input.
Select “Make Dealer Key”, and put new key into VVDI2 Programmer key coil.
Key make okay and locked.
Step 6. Key Programming
Install Comfort Modue back to vehicle, and connect VVDI2 to vehicle via OBD port.
Click “Key Learning”, wait for key learning, and then switch on vehicle using dealer key as prompt.
2 of 2 learned.
Step 7. Remote Matching
Control Unit Selection>>46-Comfortsystem>>Adjustment-10>>Radio remote control Learn keys (Number of keys)
Match remote one by one, and verify by “Read”.
Done! That’s how to program VW Passat 2011 when all key lost using VVDI2 and VVDI PROG.