This article is going to show you how to add a key for Lada Largus 2018 through block programming.
EEPROM:
M95040
Tools:
Procedures:
Step 1. Remove chip
Remove chip and solder it to VVDI PROG EEPROM Adapter.
Step 2. Read EEPROM data
Run VVDI PROG software.
Select
“1-EEPROM&FLASH” “ST” “M95040”.
Read and save EEPROM.
Step 3. Make Dealer Key
Run VVDI2 software.
Enter “Transponder Programmer”.
Select “Euro” “Renault” “Logan” “2010- -95040”.
Put a new key into VVDI2 key coil.
Select used key position and load EEPROM file we just got.
Click “Make Dealer Key” and select “PCF 7936(PCF 7946)”.
Save new file for writing back to module.
Step 4. Write EEPROM Back
Load new EEPROM file.
Write it back to M95040 chip.
Install chip and module back to the vehicle, and test new key.
Done! That’s how VVDI PROG + VVDI2 do AKL programming for Lada Largus 2018.
https://www.xhorsevvdi.com/
Skype: xhorsevvdi.com
Whatsapp:+86-13983756354
Whatsapp: 
Skype: