VVDI Prog FUJITSU MB91F591B Erase Error(00) Tips

VVDI Prog Programmer is supported to read, write, erase. But we received feedback that:

fujitsu mb91f060b mcu writing error

[2022-10-18 08:35:54] : Check Device…
[2022-10-18 08:35:55] : 12V Power Adaptor connected
[2022-10-18 08:35:55] : Initialization device…
[2022-10-18 08:35:55] : Initialization success!
[2022-10-18 08:35:56] : Initialization chip…
[2022-10-18 08:35:59] : Start communication…
[2022-10-18 08:35:59] : Erase length:0x10000
[2022-10-18 08:35:59] : Erasing…(0%)
[2022-10-18 08:36:00] : Erase Error(00)

Error pic is like following pic:

Engineer suggestion:

please try more times
if still the same error
it is not support your type to erase

Newest status:

I solved thanks
after 6. try complated 🙂