Today, used VVDI Key Tool Plus and XM-Toy00GL key to successfully generate XM-TOY00GL and program new smart key to Toyota Camry 2015.
Next is to check original Toyota Remote.
PS: we have the working key.
Path: transponder clone -> read transponder.
It is 8A Toyota Keyless Go learned.
Check frequency.
It is FSK312.1MHZ/314.35 MHZ
Next is remote program – Toyota -All remote – 0020 312.1MHZ/314.35 FSK.
Put XM-Toy00GL PCB into coil antenna hole.
Remote information: PCB number 0020.
Press [Generate], meanwhile LED on XM PCB flashing.
Calculating required 5 seconds , query after 10 seconds.
Writing data, please wait…
Process time around 1-2 minutes.
Burn success.
Put XM-TOY001 into Toyota smart shell.
Go to program new smart remote.
Firstly, test original remote and new remote.
Then go to: IMMO program -Toyota -select by model.
Camry – 2010 -Smart key system 8A /4D CAN.
Press “Start program”.
Select “Read the number of keys”.
Please switch ignition on.
The number of registered key:1
Add key.
Please switch ignition on.
The number of registered key:1 , the number of keys that can also registered: 6
Keep touching the ignition switch with sign surface of a registered key, complete the operations within 30 seconds after clicking [OK].
Click [OK] and keep touching the ignition switch with sign surface of a registered key within 30 seconds.
Note: if key sound once, take the key farther away. If key sound twice, it is programmed successfully.
Key registration succeeded!
The number of registered key:2 , the number of keys that can also registered: 5.
Please check if function of remote normal.
Remote function is ok and can start.
Job is done.
Whatsapp: 
Skype: