Question: Trying to cut a 2018 Lincoln key but it’s not listed in Dolphin XP005. Here is the Answer: Select any Ford or Lincoln with Hu101 10-cut, Or select under the menu Aviator. Good to know: Do not select… Continue Reading
One customer gave feedback that he had these errors with the Dolphin 005 and strange rumors from machine. Here is how Xhorsevvdi tech troubleshoot: 1.Electrical Conductivity Test Through tests, probe and cutter work fine. 2.X-/Y-/Z-axis Motor Test Through tests, sensor… Continue Reading
Question: Xhorse Dolphin XP005 Machine won’t calibrate itself and shows “Error 80 Device calibration error can’t do universal key duplication”. Here Xhorsevvdi tech shows the Solution: 1.Update firmware, calibrate machine, and try again 2.Perform Electrical Conductivity Measurement Here it also… Continue Reading
One customer give feedback that his Dolphin XP005‘s cutter won’t rotate or move. Then we found its belt is broken and it’s fixed after replacing. So, here is going to show you how to replace the belt of Xhorse Dolphin… Continue Reading
One customer gave feedback that all cutting on Clamp M1 is out of center. Xhorse Dolphin I, HU 46 direct bitting, manual paste code. Here Xhorsevvdi shares the Solution: Connect Dolphin I Machine to PC, and update firmware via Upgrade… Continue Reading
Issue: Dolphin XP005, the probe works well, but the cutter will restore itself once it touches the key blade. Have done the electrical conductivity test: X- and Y-axiz are normal, but the main axiz has something wrong. Here Xhorsevvdi engineer gives… Continue Reading
E-mail:sales@xhorsevvdi.com
Whatsapp: +86-13983756354
Live Chat: Online Service
Skype: xhorsevvdi.com
