One customer gave feedback that his Condor Mini Plus could not detect key and it said “Learn Fail:12 (probe detected)”. Here Xhorsevvdi tech shares Reason: Machine is short-circuited. Solution: Clean LED cover and remove metal filings inside. Hope this… Continue Reading
Question: M5 Clamp won’t work with my Condor XC-Mini. I update it to the latest version, but now I can’t calibrate the machine at all, with M1 M2 M5… it could work with M1 M2 clamp before update. Here is… Continue Reading
Xhorse M5 Clamp adds more machine models on the list except Dolphin II and Condor II Machine. Now M5 Clamp: 1.Equivalent with M1&M2 clamp 2.Compatible with Dolphin XP005, Dolphin XP005L, Condor Mini, Condor Mini Plus, Condor Mini Plus II 3.Support… Continue Reading
Question: It has not been used for several days. and it always stands in one place, I don’t carry it anywhere. If this error needs to clear internal error in xhorse update kit software, and then update firmware. To clear… Continue Reading
One customer gave the feedback that the cutter of his Xhorse Condor Mini Plus stopped moving before cutting a HU66 blade. Here is how Xhorsevvdi technician troubleshoots, 1.Do Main motor test (Path: Device Information>>Motor Measurement>>Main motor test) Notes: 1)See if… Continue Reading
Condor XC-Mini Plus V3.6.0 firmware is released! V3.6.0 Condor XC-Mini Plus Update Info (2022-09-09): + Add Citroen C-Quatre key data + Add Honda Legend key data + Fix Buick HU100 key data issue + Fix Smart For Tow key… Continue Reading
One customer gave feedback that his Condor XC-Mini Plus prompts “internal error 1(-3)”. Here Xhorsevvdi shows the Solution: Repair firmware by Xhorse Upgrade Kit. (Notice: if you need to save history, please Read history and backup) Step 1. Go to… Continue Reading
Question: To duplicate the blade on a Renault Megane 2 using Condor XC-Mini Plus, it says “Learn Fail, 25 (Put Key)”. Reason: The thin blade of Megane 2 only has one side to cut, and is so low on the clamp… Continue Reading
Recent time we received feedback that I have a condor mini xc and when I turn it on, the white LED light comes on and the cutter moves around, and then the white led light blinks one time and turns… Continue Reading
Issue: Condor XC-MINI Plus, the time on the screen was set correctly before, but every time I turn it on, it became wrong again. Xhorsevvdi technician gives the Solution: Replace the button battery (CR1220) on the motherboard. Detailed Procedure:… Continue Reading
V3.5.0 Condor MINI Plus and V1.4.9 VVDI MINI Key Tool newest version is released! And both of them, please use xhrose update kit software to update firmware. V3.5.0 Condor MINI Plus Update + Add parts of Chinese car models +… Continue Reading
Xhorse condor mini plus powerful automatic key cutting machine, and we received feedback that condor xc-mini plus got error “Learn fail: 50, error code=50” The error pic like the following pic: I bought the condo xc mini plus. Model EPp-300-24… Continue Reading
E-mail:sales@xhorsevvdi.com
Whatsapp: +86-13983756354
Live Chat: Online Service
Skype: xhorsevvdi.com
