Xhorse VVDI2 and vvdi key tool plus will release BMW G series BDC2 soon, and to use safer with BMW G series car, will release BMW G series solder-free adapter to use together. Here is the test steps for key tool plus and BMW G series solder-free adapter to add BMW BDC2 key.
And as a friendly reminder, this is beta version of cable, when it is OK to sale, the product actual outlook maybe different.
Here is the step:
1. Remove the housing of the BDC2.
2. Take out the PCB, connect the BMW G series solder-free adapter with the BDC2 PCB.
3. Connect with VVDI Key Tool Plus.
4. Enter vvdi key tool plus BCD2 Programming page.
5. Then do like the 3 steps: Read Vehicle Information; Pre-process BDC2 IMMO info; Generate dealer key;
6. After successful reading and no abnormal prompts click OK to continue.
7. Pre-process step
After entering pre-processing: Step one is to back up the code.
Click OK and the system starts reading and saving the code.
The whole process needs to be connected to the network.
After the code is saved, pre- processing begins.
Step two: Enter the mode.
After entering step two, the system automatically processes data upload.
Wait patiently for the process to end until the system indicates readiness.
Step three: Read key password.
Follow the device prompt to stably connect the 8 – corner IC adapter.
Click OK to read key pass.
Read successfully, click OK to save the key code.
Step four: Upgrade programming
The process will take about 8-10 minutes.
Do not touch any connection lines or the power of the adapter during this process.
Step five: Restore the code
Click OK, and the system automatically restores the previously stored code.
After restore OK, Click OK. Then exit the pro-processing page.
8. Make Dealer Key
Select the key position for new key.
The system prompts to load the previously saved key file.
Insert the original car key to read the synchronization data from it.
Read OK and then save the sync data.
Next time if you want to add a key, you can directly generate it with the key file and synchronization data, without pre-processing again.
9. Put back the PCB into original shell.
9. Key- generating process is completed. Then perform BDC restoration.
The Xhorse BMW BDC2 adapter can only handle data processing for key matching.
To learn and verify the key, install the BDC2 in the car or use a test bench (GODIAG for BMW BCD2 Test Platform).
When learning a new key, place it within the test bench’s or vehicle’s induction range and press the start button for 15 seconds.
The 8- corer IC card in the video is for testers to DIY modify. The official product will have a more secure card- board structure.
More info, we will keep updating.
Whatsapp: 
Skype: