MINI Prog programmer is new released Xhorse programmer, here we will introduce how to use Xhorse MINI Prog read BMW FEM/BDC data.
1.Here is the BMW FEM/BDC PCB
2.First we need to take the emery wand
Polish the eight corners
Remove grease and waterproof glue
3.Choose the adapter. You can see the red marking line on the adapter, the red one is the first
4.Press the adapter head on the chip
5.After pressing, select “EEPROGM and Flash” on Xhorse APP
Select manufacture, choose 25256. Then read the data. Click to start
6.After pressing and connect OK, choose start button on MINI Prog
Or click continue in xhorse app
7.Check OK. Read data.
Usually if using welding method
Easy to damage the resistance, etc on PCB
Use MINI Prog now,no soldering
Video of How to use MINI Prog Read BMW FEM/BDC Data?