1.Firstly,it will request PIN and CS information to input into new instrument, you can get it via Iscancar VAG MM-007 to read by OBD from the engine or IMMO system to read.
2.Enter the new PIN, CS1 (6 bytes CS in the engine), CS2 (another 6 bytes CS), in general,the IMMO system will display all the data, power level (the value in IMMO and the engine system needs to the same).
3.Enter new VIN and IMMO code.
4.Confirm the data is right or not.
5.If all the data is right,the dashboard will display new information for PIN,CS,VIN.etc.
6. Instrument matching is completed, the dashboard will display 0-0, then need to learn the key and synchronous engine, you can complete it with VAG MM-007 too.