Did you have these problems below after BMW OBD Programming using Key Tool Plus/ VVDI2/ BIM Tool or other tools?
>Prompts unsupported versions and requires upgrades
>Preprocessing ok but coding loss and can’t recover it
>Preprocessing is unexpectedly interrupted due to missing SWFL version
>SWFL or coding version mismatch
Here we will show you how to fix these issues using VVDI BIM Tool.
Take FEM.
BIM Tool showed SWFL Lost.
Then we will fix it using BIM Tool.
Select “Fxx/Gxx Program/ Code” and “Connect Car”.
Select
Vehicle programming>>40-FEM(FEM_BODY)>>Calculate programming file
“Target istufen lev” should be the same as “Shipment”.
The part in grey indicates FEM’s version, and the part in orange FEM version to be programmed.
Select “Programming”.
Read and clear DTCs。
Select
FEM/BDC Key Learn>>Get Key Info
Coding recovered.
Done! That’s how to solve “SWFL Lost” using BIM Tool.
Skype: xhorsevvdi.com
Whatsapp: https://wa.me/8613983756354
Whatsapp: 
Skype: