Xhorse Dolphin user is required to do these 4 steps of calibration before using this machine.
-> Height level adjustment
-> Cutting calibration
->Clamp calibration M1
->Clamp calibration M2
One phone (Android or IOS is ok) with Bluetooth
Download Xhorse Dolphin APP on your phone.
Tap “Select” to connect Bluetooth until you can see the Bluetooth Icon on the Dolphin machine.
Part 1: Height level adjustment
Tap “Machine Parameter”.
Tap “Height level adjustment”.
Use the screwdriver to tighten the probe and clamp by following the on-screen tips.
After that, tap “Start” to adjust the height level until you see it finished.
After height level adjustment. Please setting cutter diameter again!
Part 3: Cutting calibration.
Back to select ” Cutting calibration”.
Before click on “Start”, please read the tip and follow it to do.
Tap “Start” to calibrate.
Part 2: Clamp calibration.
Back to tap “ Clamp calibration”.
Select M1 clamp to calibrate.
Read tip :
- Before use this function, please make sure already done “Height level adjustmen”.
- Please insert new HON66 key blank and tighten the clamp.
M1 clamp calibration ok.
Change M2 clamp to calibrate.
Read the tip if you do like it says.
Go on calibration M2-B, M2-C, M2-D.